YGW-5080M Light shading goggle with ventilator #1.7

Protective goggles for light shading

遮光度番号：3

Rubber-framed model of light-shielding goggles.

Product WHD(mm)	W164×H77×D76 (mm) *Except belt part
Weight	81g
Frame material	Polyvinyl(Ventilator)
Frame color	Light Green
Lens material	Cellulose
Lens	Mistless(Both sides Anti-fog)
Lens color	Green
Welding shade	1.7

UV Protection Lens
OTG(Over The Glasses)
Can be used with masks
Lens exchangenable

Product features

Standard model of light-shielding protective goggles / Anti-fog lens
Can be worn over eyeglasses

Features

◆Mistless lens (both side anti-fog)

Anti-fog coating on cellulose lens
The water-absorbing antifog coating is highly effective against initial fogging.

◆Ventilation

Ventilation system that allows for internal ventilation while maintaining the protection of the goggles.
(with two ventilators at the top of the goggles and two air ventilation at the bottom of the frame)

◆Overglass type

Can be worn over prescription glasses
(Some large glasses may not be able to be used together.)

◆Lens exchangeable

If the lens gets scratched or dirty, you can simply replace it with a lens sold separately.
Hook-type lens stopper for easy lens replacement.

◆Can be used with masks

Frame that prevents gaps between mask and goggles

◆UV protection

Blocks more than 99.99% of harmful ultraviolet rays (380nm or less).

◆Light-shielding glasses are required for people other than actual workers, such as visitors and passers-by.◆

There have been many cases that people who pass by the construction site or workers beside the welding works were exposed to harmful rays from the lateral sides and later suffered from eye swelling and pain.
In order to prevent such cases, it is very important to wear light-shielding glasses with side shields or eyecups.
Visitors and passers-by can also avoid these hazards by using light-colored shading lenses (*).
(*) Although it depends on the usage environment, please select the lens that best suits your situation, such as #1.4 or #1.7, which do not darken the field of vision too much.

*The lens surface of anti-fog specification lenses may turn whitish during distribution or depending on the customer's usage and storage environment.
This is due to the action of the antifog agent (anti-fogging agent). There is no problem with the performance, so please wipe it off lightly with a soft cloth before use.
The anti-fogging effect will deteriorate with use of the product due to scratches, dirt, and other factors.
If the anti-fogging effect deteriorates, use the separately sold "Demist Series".

Specs

Product WHD(mm)	W164×H77×D76 (mm) *Except belt part
Weight	81g
Frame material	Polyvinyl(Ventilator)
Frame color	Light Green
Lens material	Cellulose
Lens	Mistless(Both sides Anti-fog)
Lens color	Green
Welding shade	1.7

Support

See User guide