YLC-3 Laser Shield Curtain
Laser shield curtains
| Product WHD(mm) | Effective width 1m（Thickeness 0.5mm）／MAX Length up to 10m |
|---|---|
| Size | 1M×10M |
| Material | Polyvinyl chloride(PVC) |
| Color | GREEN |
| Filter code | YLC-3 |
| Filter Color | GREEN |
| Conformity standards |
Product features
Laser light complete absorption type
Adaptive laser :Red laser etc...
A model that can be easily attached to any place (※) and supports lasers up to the red laser ~ near infrared range that protects workers from laser exposure.
From the viewpoint of safety, it is mandatory that the laser device be confined to an enclosed area, but the laser shield curtain can be cut with scissors and attached not only to flat surfaces but also to curved surfaces. While isolating the work area from the outside, you can also check the status of the workers inside.
※No unevenness on the surface, smooth surface.
-
Water only, no adhesive is required.
Anybody, Anywhere, As many times, Easy installation.Easy to install on a smooth surface such as glass window or an inspection window. Due to self adhesive, easy to paste with only water and can be removed as many times as you like.
-
Able to cut by scissor to freely size.
The soft material sticks to curved surface.Because of PVC material, it is soft and easy to be cut by scissor or cutter you have. Available to apply light-shielding performance to various size such as irregular, curved, and polyhedral as long as the surface is smooth.
-
By lay over the YLC shield products, Achieve to high performance
and wide range of wavelength shielding performance.Available for multiple laser light or wavelength by overlaying multiple YLC shield products. Also possible to up the OD spec, or to shield for multiple range of wavelength.
Before to use
※If there is dirt or oil on the surface, it will not be possible to obtain sufficient adhesive strength.
※When pasting, try to avoid air bubbles as much as possible between the curtain and the glass surface.Even if air bubbles enter, it does not
affect the light-shielding performance. However the adhesion may be weakened or the product might be peeled off.
※Depending on the products combination, the degree of adhesion between the products may increase and color transfer may occur, but this
does not affect its performance and safety.
Filter performance
◆Filter Specs
| Filter Code | YLC-3 |
|---|---|
| Filter Color | GREEN |
| Visible light transmittance | 3％ |
| Adaptive wavelength | 585-810nm OD3 |
◆Spectroscopic graph
※Graph data is actual values. Not a guaranteed value.
Specs
| Product WHD(mm) | Effective width 1m（Thickeness 0.5mm）／MAX Length up to 10m |
|---|---|
| Size | 1M×10M |
| Material | Polyvinyl chloride(PVC) |
| Color | GREEN |
| Filter code | YLC-3 |
| Filter Color | GREEN |
| Conformity standards |
■Standards
European Norm：EN12254
